Maslow CNC

From The Maker Station Wiki!
Revision as of 08:28, 23 February 2018 by Tanju (talk | contribs)
Jump to: navigation, search

Matthew, Tanju, Mike, Alex, and Chuck have been setting up and tweaking this DIY CNC to cut full sheets of plywood!

The Maslow CNC requires advance training and should not be used with consulting first with the members listed above.

General Info: http://www.maslowcnc.com/


Maslow.jpg
Maslow2.JPG
Maslow3.jpg
Maslow6.jpg
Maslow5.jpg
Maslow7.jpg


      1. Rough Notes & Lessons Learned

1. Disable "Sleep" power option on the computer running Ground Control. CNC cutting at a large scale is time consuming, having the computer go to sleep in the middle of a job will result in need to abort the job and recalibrate 2. Always verify Z-axis zero and smooth z-travel of the router before beginning to ensure the target depth can be achieved