Difference between revisions of "3D Printer - 3DS Cube no.2"

From The Maker Station Wiki!
Jump to: navigation, search
(Created page with "{{Template:Equipment |owner=The Maker Station |serial=Serial Number? |model=Cube 2nd gen |arrived=Oct 7, 2014 |doesitwork= Not Working :( |contact=TJ Bayramoglu |where=Near th...")
 
(Info)
Line 10: Line 10:
  
 
== Info ==
 
== Info ==
This printer is currently suffering from chronic "Filament Flow Error" that can not be resolved.
+
[[File:filamentflowfail.jpg]]
 +
This printer is currently suffering from chronic "Filament Flow Fail" that can not be resolved.
  
 
Intending to hack this printer and replace the control card and print nozzle with open-source options to free it from it's proprietary shackles.
 
Intending to hack this printer and replace the control card and print nozzle with open-source options to free it from it's proprietary shackles.
 
This project is pending procurement of required hardware
 
This project is pending procurement of required hardware

Revision as of 18:18, 8 October 2014

Back to list of Equipment


  • Owner/Loaner: The Maker Station
  • Serial Number: Serial Number?
  • Make/Model: Cube 2nd gen
  • Arrival Date: Oct 7, 2014
  • Usability: {{{usagerestrictions}}}
  • Contact: TJ Bayramoglu
  • Where: Near the 3D print station


Info

Filamentflowfail.jpg This printer is currently suffering from chronic "Filament Flow Fail" that can not be resolved.

Intending to hack this printer and replace the control card and print nozzle with open-source options to free it from it's proprietary shackles. This project is pending procurement of required hardware