Difference between revisions of "Maintenace"
(→Electrical) |
|||
| Line 56: | Line 56: | ||
==Electrical== | ==Electrical== | ||
| − | Circuit | + | |
| + | *'''Unit 1''' | ||
| + | **Circuit Breakers are located in the utility closet and the wall of the woodshop | ||
| + | *'''Unit 2''' | ||
| + | **Circuit Breakers are located in the front segment of the Metal shop | ||
==Fire Protection== | ==Fire Protection== | ||
Revision as of 19:03, 26 July 2022
The space requires minimal maintenance but the items detailed below are required. Use the Blog:Maintenance to log maintenance activities.
Report all findings, issues, questions, and concerns to the makerspace Board of Directors
| Item | Frequency | Notes |
| Trash | Weekly | Currently not enough money in the budget for trash service or dumpster Someone volunteers to take trash home, uses residential service |
| Front Door | Weekly | Confirm door/lock are in good condition. Sweep Entrance |
| HVAC | Twice per year | There are 3 HVAC zones in the space see details below |
| Bathroom | Monthly | Check for Leaks Clean sink & toilet Replenish toilet paper & towels |
| Back Door | Weekly | Confirm no items blocking the fire exit **Confirm no items blocking the fire exit Make sure the back door fire exit is not blocked |
| Roll Up Door | Weekly | Confirm roll up chain is not binding |
| Back Shop | Weekly | Vacuum & Sweep sawdust and debris |
HVAC Details
There are 3 HVAC zones in the space:
Front
- Thermostat Controls both Heating & Cooling to the front rooms. The unit is located above the bathroom
- Air Filter 20x20x1, needs to be taped to the grating to keep it from moving when the system turns on, or get a custom sized filter
Classroom
- Thermostat Controls both Heating & Cooling to the classroom only. The unit is located above the classroom just above the door to the back shop
- Air Filter 20x20x1
Shop
- Furnace provides heat only. Unit is mounted off of the ceiling way back above the bathroom... but only heats the back shop
Electrical
- Unit 1
- Circuit Breakers are located in the utility closet and the wall of the woodshop
- Unit 2
- Circuit Breakers are located in the front segment of the Metal shop
Fire Protection
Fire Code compliance
Fire Extinguishers: There are two certified wall mounted fire extinguishers for the space:
- Front: in lobby in front of the 3D Printer room
- Back Shop: by the door next to the CNC
In addition there is a consumer grade fire extinguisher mounted on the all in the 3D Printer Room, and there is another on top of the fridge
