Difference between revisions of "FrankenBot 2.0"
| Line 13: | Line 13: | ||
The Frankenbot is a rebuilt/upgraded [http://store.quintessentialuniversalbuildingdevice.com/product.php?id_product=145 QUBD 2up] Converted to 3up and then updgraded with 3d printed parts including http://www.thingiverse.com/thing:1247232 Thingiverse File] | The Frankenbot is a rebuilt/upgraded [http://store.quintessentialuniversalbuildingdevice.com/product.php?id_product=145 QUBD 2up] Converted to 3up and then updgraded with 3d printed parts including http://www.thingiverse.com/thing:1247232 Thingiverse File] | ||
| − | + | [[Image:Frankenbot_b.jpg|left|400 px|border|{FrankenBot}]] | |
| − | + | [[Image:E.jpg|thumb|none|50 px|{Original 2up}]] | |
| − | 3up | + | [[Image:3up.jpg|thumb|none|50px|{3Up}]] |
| − | |||
| − | |||
'''General Specs''' | '''General Specs''' | ||
Revision as of 07:18, 19 December 2016
- Owner/Loaner: The Maker Station
- Serial Number: Serial Number: N/A
- Make/Model: FrankenBot
- Arrival Date: Nov 2016
- Usability: {{{usagerestrictions}}}
- Contact: info@themakerstation.com
- Where: 3D printer station
Contents
Info
The Frankenbot is a rebuilt/upgraded QUBD 2up Converted to 3up and then updgraded with 3d printed parts including http://www.thingiverse.com/thing:1247232 Thingiverse File]
General Specs
- Single print nozzle/Single color
- Material: Standard 1.75 PLA
- Build Dimensions: 170mm x 165m x 190mm
- Software: Repieter with Slic3r
- Operating Temperature Range
- Maximum Tool Head Temperature: 265°C
- Maximum Heated Bed Temperature: 100°C
Permissions
- For general use by members.
- Printing Policy
- Treat equipment as if it were your own and put away as or better than you found it.
- Printing costs are incurred on a per gram basis using the scale provided at the printing station. Reference the Maker Station's 3D Printing Policy for details.
Restrictions
Station Provided PLA ONLY Must have understanding of adjusting Z-layer
Basic Instructions
Advanced Operational Knowledge
There are some more advanced tasks that not everyone needs to know to print, but needs to know to troubleshoot:
- How to clear nozzle jams
- How to load/replace filament
Warnings
- Keep loose hair and sleeves away from all moving parts.
- Print nozzle/extruder operating temperature range is 180-300°C (356-572°F).300°C
- Some printed parts may present a CHOKING HAZARD or may be SHARP; not for children under 3 years old.
- Build plate is glass, take care not to scratch it
Safety
- Keep loose hair and sleeves away from all moving parts.
- Do not touch the printer nozzle/extruder while hot during print cycle.
- Material Safety Data Sheet:
- 3D Printer Policy, The Maker Station makerspace
