Difference between revisions of "FrankenBot 2.0"
m |
|||
| Line 1: | Line 1: | ||
| − | The | + | {{Template:Equipment |
| + | |owner=The Maker Station | ||
| + | |serial=Serial Number: N/A | ||
| + | |model=FrankenBot | ||
| + | |arrived=Nov 2016 | ||
| + | |doesitwork=Working | ||
| + | |contact=info@themakerstation.com | ||
| + | |where=3D printer station | ||
| + | }} | ||
| − | [[File: | + | == Info == |
| + | The Frankenbot is a rebuilt/upgraded [http://store.quintessentialuniversalbuildingdevice.com/product.php?id_product=145 QUBD 2up] Converted to 3up and then updgraded with 3d printed parts including http://www.thingiverse.com/thing:1247232 Thingiverse File] | ||
| + | |||
| + | FrankenBot:[[File:Frankenbot_b.jpg |500 px]] | ||
| + | 2up:[[File:Example.jpg]] | ||
| + | 3up: | ||
| + | |||
| + | |||
| + | |||
| + | '''General Specs''' | ||
| + | * Single print nozzle/Single color | ||
| + | * Material: Standard 1.75 PLA | ||
| + | * Build Dimensions: 170mm x 165m x 190mm | ||
| + | * Software: Repieter with Slic3r | ||
| + | * Operating Temperature Range | ||
| + | ** Maximum Tool Head Temperature: 265°C | ||
| + | ** Maximum Heated Bed Temperature: 100°C | ||
| + | |||
| + | |||
| + | == Permissions == | ||
| + | * For general use by members. | ||
| + | * '''[https://drive.google.com/file/d/0B8b3ZIjicu09UDdHaVF4N1B5RXc/view?usp=sharing Printing Policy]''' | ||
| + | * Treat equipment as if it were your own and put away as or better than you found it. | ||
| + | * Printing costs are incurred on a per gram basis using the scale provided at the printing station. Reference the Maker Station's 3D Printing Policy for details. | ||
| + | |||
| + | == Restrictions == | ||
| + | Station Provided PLA ONLY | ||
| + | Must have understanding of adjusting Z-layer | ||
| + | |||
| + | [[File:Frankenbot a.jpg |500 px]] | ||
| + | |||
| + | == Basic Instructions == | ||
| + | |||
| + | |||
| + | |||
| + | == Advanced Operational Knowledge == | ||
| + | There are some more advanced tasks that not everyone needs to know to print, but needs to know to troubleshoot: | ||
| + | *How to clear nozzle jams | ||
| + | *How to load/replace filament | ||
| + | |||
| + | == Warnings == | ||
| + | |||
| + | * Keep loose hair and sleeves away from all moving parts. | ||
| + | * Print nozzle/extruder operating temperature range is 180-300°C (356-572°F).300°C | ||
| + | * Some printed parts may present a CHOKING HAZARD or may be SHARP; not for children under 3 years old. | ||
| + | * Build plate is glass, take care not to scratch it | ||
| + | |||
| + | |||
| + | |||
| + | == Safety == | ||
| + | |||
| + | * Keep loose hair and sleeves away from all moving parts. | ||
| + | * Do not touch the printer nozzle/extruder while hot during print cycle. | ||
| + | * Material Safety Data Sheet: | ||
| + | * | ||
| + | * 3D Printer Policy, The Maker Station makerspace | ||
Revision as of 06:57, 19 December 2016
- Owner/Loaner: The Maker Station
- Serial Number: Serial Number: N/A
- Make/Model: FrankenBot
- Arrival Date: Nov 2016
- Usability: {{{usagerestrictions}}}
- Contact: info@themakerstation.com
- Where: 3D printer station
Contents
Info
The Frankenbot is a rebuilt/upgraded QUBD 2up Converted to 3up and then updgraded with 3d printed parts including http://www.thingiverse.com/thing:1247232 Thingiverse File]
FrankenBot:
2up:File:Example.jpg
3up:
General Specs
- Single print nozzle/Single color
- Material: Standard 1.75 PLA
- Build Dimensions: 170mm x 165m x 190mm
- Software: Repieter with Slic3r
- Operating Temperature Range
- Maximum Tool Head Temperature: 265°C
- Maximum Heated Bed Temperature: 100°C
Permissions
- For general use by members.
- Printing Policy
- Treat equipment as if it were your own and put away as or better than you found it.
- Printing costs are incurred on a per gram basis using the scale provided at the printing station. Reference the Maker Station's 3D Printing Policy for details.
Restrictions
Station Provided PLA ONLY Must have understanding of adjusting Z-layer
Basic Instructions
Advanced Operational Knowledge
There are some more advanced tasks that not everyone needs to know to print, but needs to know to troubleshoot:
- How to clear nozzle jams
- How to load/replace filament
Warnings
- Keep loose hair and sleeves away from all moving parts.
- Print nozzle/extruder operating temperature range is 180-300°C (356-572°F).300°C
- Some printed parts may present a CHOKING HAZARD or may be SHARP; not for children under 3 years old.
- Build plate is glass, take care not to scratch it
Safety
- Keep loose hair and sleeves away from all moving parts.
- Do not touch the printer nozzle/extruder while hot during print cycle.
- Material Safety Data Sheet:
- 3D Printer Policy, The Maker Station makerspace
