Maintenace

The space requires minimal maintenance but the items detailed below are required. Use the Blog:Maintenance to log maintenance activities.
Report all findings, issues, questions, and concerns to the makerspace Board of Directors

Maintenance Items

Item	Frequency	Notes
Trash	Weekly	Currently not enough money in the budget for trash service or dumpster Someone volunteers to take trash home, uses residential service
Front Door	Weekly	Confirm door/lock are in good condition. Sweep Entrance
HVAC	Twice per year	There are 3 HVAC zones in the space see details below
Bathroom	Monthly	Check for Leaks Clean sink & toilet Replenish toilet paper & towels
Back Door	Weekly	Confirm no items blocking the fire exit **Confirm no items blocking the fire exit Make sure the back door fire exit is not blocked
Roll Up Door	Weekly	Confirm roll up chain is not binding
Back Shop	Weekly	Vacuum & Sweep sawdust and debris

HVAC Details

There are 3 HVAC zones in the space:

Front

• Thermostat Controls both Heating & Cooling to the front rooms. The unit is located above the bathroom
• Air Filter 20x20x1, needs to be taped to the grating to keep it from moving when the system turns on, or get a custom sized filter

Classroom

• Thermostat Controls both Heating & Cooling to the classroom only. The unit is located above the classroom just above the door to the back shop
• Air Filter 20x20x1

Shop

• Furnace provides heat only. Unit is mounted off of the ceiling way back above the bathroom... but only heats the back shop

Electrical

• Unit 1
  • Circuit Breakers are located in the utility closet and the wall of the woodshop
• Unit 2
  • Circuit Breakers are located in the front segment of the Metal shop

Fire Protection

Fire Code compliance

Fire Extinguishers: There are seven wall mounted fire extinguishers for the space:

• Unit 1:
  • Front lobby by kitchenette
  • Woodshop by office door
  • Woodshop by rear door

• Unit 2:
  • Front Lobby
  • Metal shop by office door
  • Metal shop by rear door

In addition there is a C02 fire extinguisher by the Laser Cutter in the unit 2 shop.