LulzBot Mini 3D Printer

From The Maker Station Wiki!
Revision as of 12:28, 28 March 2015 by Tanju (talk | contribs) (Basic Instructions)
Jump to: navigation, search

Back to list of Equipment


  • Owner/Loaner: The Maker Station
  • Serial Number: Serial Number: KT-PR0035-0504
  • Make/Model: LulzBot Mini
  • Arrival Date: March 2015
  • Usability: {{{usagerestrictions}}}
  • Contact: info@themakerstation.com
  • Where: 3D printer station


Info

We have a LulzBot Mini 3D printer courtesy of Aleph Objects Inc 4th Annual Hackerspace Giveaway. Many thanks to the great folks at Aleph Objects!

LulzBot-Mini.jpg


General Specs

  • Single print nozzle/Single color
  • Material: Standard 3 mm HIPS
  • Build Dimensions: 152mm x 152mm x 158mm (6in x 6in x 6.2in)
  • Layer Height: From 0.05mm to 0.50mm (0.002in - 0.020in)
  • Multi-Software Compatible: Freedom to use any number of 3D printing software programs, Cura LulzBot Edition comes standard. Other compatible software includes OctoPrint, BotQueue, Slic3r, Printrun, MatterControl, and many more.
  • Operating Temperature Range
    • Maximum Tool Head Temperature: 300°C (572°F)
    • Maximum Heated Bed Temperature: 120°C (248°F)


Permissions

  • For general use by members.
  • Treat equipment as if it were your own and put away as or better than you found it.

Restrictions

  • Discouraged Materials: 3D printing with carbon fiber filaments is not recommended at this time because carbon fiber filaments can degrade both the nozzle and hot end of the LulzBot Mini Tool Head.

Basic Instructions



LulzBot mini poster.JPG

Advanced Operational Knowledge

There are some more advanced tasks that not everyone needs to know to print, but needs to know to troubleshoot:

  • How to correct "Filament Flow Errors"
  • How to clear nozzle jams
  • How to load/replace filament cartridges

Warnings

  • Keep loose hair and sleeves away from all moving parts.
  • Cube Print nozzle/extruder operating temperature range is 180-220°C (356-428°F).
  • Some printed parts may present a CHOKING HAZARD or may be SHARP; not for children under 3 years old.
  • Build plate is glass. Do not drop the build plate

Safety

  • Keep loose hair and sleeves away from all moving parts.
  • Do not touch the printer nozzle/extruder while hot during print cycle.
  • Material Safety Data Sheet:Cube PLA MSDS
  • PLA is not intended for:
    • (A) in any application which is intended for any internal contact with human body fluids or body tissues
    • (B) as a critical component in any medical device that supports or sustains human life; and
    • (C) specifically pregnant women or in any applications designed specifically to promote or interfere with human reproduction.

References