2015 Modified Power Wheels for Power Racing Series Race the ATL MakerFaire

From The Maker Station Wiki!
Revision as of 15:21, 21 June 2015 by Tanju (talk | contribs)
Jump to: navigation, search
Prs banner quilt.jpg

The MakerStation is currently planning to build and enter two cars to this year's race. Details are pending.


Detailed info and rules can be found at the Power Racing Series' website Here are some of the more important rules:

2.9 | Vehicle Size
The vehicle may not exceed 62” long by 36” wide. Seat height may be no lower than the axle height, even height is permitted. Overall height is restricted to 72” including the height of the driver while in the seated position. (These dimensions represent roughly the size of the Doge Ram, the largest Power Wheels vehicle on the market as of 2015) No part of the vehicle may protrude beyond the dimensions detailed in this rule. All vehicles will be measured by track officials before each race. Any vehicle that does not comply with this rule will be required to conform to the aforementioned dimensions before it is allowed to race or risk disqualification.

Teams must design the car in a way that ensure the driver’s feet are protected and within the confines of the vehicle’s dimensions. No overhanging feet. Your feet may not be protruding from the vehicle and especially not be the first part of your machine that hits the wall. Teams must conform to this rule and modify their car until it complies before being allowed to race.




PowerWheels PhotoGallery